Peloton Bike & Bike + Roulements de tendeur de poulie de renvoi de haute qualité

I ordered these while I had everything else apart. (Replaced Front Hub and Bottom Bracket) This added about 10 minutes of work to that effort. Very easy with the snap ring expander. I put a thin film of Phil grease on the fitting the bearings fit onto. Gave me some peace of mind that I won't be tearing my Bike+ apart again for a long time.
I REALLY suggest you find a way to manage the path of sweat. Part failure isn't really the fault of the part as much as the overall Peloton design. I use a short piece of PVC pipe with rubber fittings on each end with a towel draped over it to shed sweat away from that whole problem area where ALL the sweat goes.
You have to be crafty to keep your Peloton alive. A better design would prevent this.

I bought the bearings alone having watched the video that made it look easy to pull the old bearings. It was NOT easy. They were completely rusted in place and took a couple hours with an angle grinder, hammer, torch, and lots of profanity to remove.

Just buy the whole assembly and save yourself the struggle.

Parts arrived in soft packaging ripped. I assume this is from a sorting machine. Bearings missing. Refund process and troubleshooting is cryptic. Should have gone through OnePeloton Vs 3rd party. Main hub/axle replacement part still pending arrival over 2 weeks. Just a waste of time.

Works great thank you

I received the part and after install still had issues. Upon having a peloton technician come to fix the bike they confirmed it was a faulty part as there was lateral play in the bearings. There is also no adjustment on this part as compared to the peloton RP11 or SP11 part which does. Would not recommend purchasing here.